2 Technical Data

2.1 Size and Weight

Dimensions:

30 \(\times\) 40 \(\times\) 5 mm

Weight:

9 g

2.2 TDC characteristics

Refer to the main TimeTagge4 User Guide.

2.3 Electrical characteristics

Symbol	Parameter	Min.	Typical	Max	Unit
Ptotal	Total power consumption		1.6	2.2	W
VCC3.3	VCC33 voltage	3.2	3.3	3.4	V
I3.3	VCC33 input current		470	650	mA
VCC2.5	VCC25 voltage	2.4	2.5	2.6	V
I2.5	VCC25 input current		10		mA

2.4 Information required by DIN EN 61010-1

2.4.1 Manufacturer

The device is a product of:

cronologic GmbH & Co. KG

Jahnstraße 49

D-60318 Frankfurt

HRA 42869 beim Amtsgericht Frankfurt/M

VAT-ID: DE235184378

2.4.2 Intended Use and System Integration

The devices are not ready to use as delivered by cronologic. It requires the development of carrier boards and specialized software to fulfill the application-needs of the end-user. The device is provided to system integrators to be built into measurement systems that are distributed to end users. These systems usually consist of the TimeTagger Module integrated on a PCIe carrier board, a main board, a case, application software and possibly additional electronics to attach the system to some type of detector. They might also be integrated with the detector.

The TimeTagger Module is designed to comply with DIN EN 61326-1 when operated on a PCIe compliant main board housed in a properly shielded enclosure. When operated in a closed standard compliant enclosure, the device does not pose any hazards as defined by EN 61010-1.

Radiated emissions, noise immunity, and safety highly depend on the quality of the enclosure. It is the responsibility of the system integrator to ensure that the assembled system is compliant to applicable standards of the country that the system is operated in, especially with regard to user safety and electromagnetic interference.

When handling the board, adequate measures must be taken to protect the circuits against electrostatic discharge (ESD). All power supplied to the system must be turned off before installing the board

2.4.3 Recycling

cronologic is registered with the “Stiftung Elektro-Altgeräte Register” as a manufacturer of electronic systems with Registration ID DE 77895909.

The device belongs to Category 9, “Überwachungs und Kontrollinstrumente für ausschließlich gewerbliche Nutzung.” The last owner of the device must recycle it in compliance with

§11 and §12 of the German ElektroG, or return it to the manufacturer’s address listed in Section 2.4.1.